Bucher MaxPowa V65
Truck Sweeper
MaxPowa V65
Engineered to last, designed to perform
The Bucher V65, Pure Vacuum Street Sweeper has been developed from over 50 years of continuous improvement to meet customer requirements.
With tailored machines in your chosen field, we offer a wide choice of products and options, which ensure maximum performance is always achieved.
The MaxPowa V65 has been developed to provide longer on-station/worksite time with the lowest environmental impact, combined with ease of use and low operational costs.
Quick Look at Specifications
8.5 yd³ hopper capacity
Complete hopper constructed of 9-gauge stainless steel
410-gallon water tank
Wireless discharge control
Trailing sweepgear
PM10/2.5 Certifed
Hopper
Designed to last in the toughest environments
The MaxPowa V65 hopper is manufactured from 1.4003 stainless steel, shot blasted with aluminum oxide prior to the application of a strontium based primer followed by a hard-wearing top coat. In addition, all gray parts such as the sweepgear, powerpack and subframe are shot blasted and electro-magnetically powder painted in a durable two part epoxy paint finish. This ensures the sweeper continues to look as good as it performs, retaining a high residual value or longer in-service life.
CANbus System
Monitor sweeper performance
The CANbus system monitors sweeper performance and provides daily checks. The display incorporates as standard an audible and visual raised hopper warning, fuel gauge, engine hour metre, tachometer and a water level gauge. In addition data can be downloaded via a USB stick, showing a range of information from fuel consumption to average sweeping times.
A full CANbus integrated door mounted control pad allows the operator to safely adjust all the sweep options.
The new MaxPowa V65 is equipped with a radio controlled remote pendant allowing the operator to walk completely around the sweeper without having wires to contend with.
The operator can adjust the wide sweep brush easily to extend brush life and can check the surroundings before opening the hopper or tipping.
Safety
Designed with Safety in mind
The highly visible, self-engaging body prop provides the operator and service personnel with a safe working environment. The V Range features a wireless radio controller allowing the operator to walk entirely around the sweeper. The operator can adjust the broad sweep brush easily and check surroundings before opening the rear door or tipping.
High visibility brush plates and hose sleeves make it easier for the operator to see the brush position. The V Range is also supplied with an LED sweep gear work light as standard, and a wide range of additional LED and hazard warning lights are also available.
The auxiliary engine and hydrostatic drive pump are accessed via a wide lightweight service ladder giving three-point of contact, which easily folds away when not in use. All critical controls, including valves, solenoids, and auxiliary equipment for pneumatic, hydraulic, and water systems, are contained in a purpose-built locker on the right-hand side of the vehicle. The ease of access to this equipment facilitates diagnostic checks and maintenance.
Additionally, the MaxPowa V65 comes equipped with waterproof IP67 automotive electrical connectors for enhanced reliability. V65 models have equipment storage lockers on both sides of the hopper for the storage of hydrant or wander hose extension tubes.
Operator Expericence
Designed with the operator in mind
The in-cab center console featuring cup holders and USB charging points can be adjusted to suit the operator’s preference. The 7” color JVM screen is mounted on an articulated arm allowing tilt angle and rotation to adjust without the need for any tools. The JVM has a wide range of settings that can be tailored to suit the operational needs.
The ergonomic door controller can be used for all sweeping operations, brush position, pressure, speed, nozzle aperture, engine revs, and water jets. A heavy-duty pause button allows the operator to lift all the sweep gear until depressed again. This feature enables the operator to change from sweeping to transit quickly and easily. The V Range remembers the last sweeping settings used each time.
Pressadrain
Water purging system as standard
Water purging system so that when freezing weather conditions are anticipated, water is easily and conveniently drained from the sweeper by a simple in-cab switch. Water jets in the nozzle boxes are self-cleaning, which extends the life of the components.
Water Capacity
Up to 595 gallons
The V Range has a 410-gallon stainless steel water tank integrated into the lower portion of the hopper, and an optional 184-gallon additional water tank is also available. The MaxPowa V65 uses yellow mist atomizing jets to reduce water usage by 20%; alternatively, red nozzle jets with a higher flow are available for heavier applications. For increased productivity, an optional water recirculation system can save up to 237 gallons of water per day, extending the on worksite time and with the added advantage of reducing dust emissions.
Swept Width
Up to 141 inches with simultaneous sweep option
The MaxPowa V65 offers up to 141 inches swept width with the simultaneous sweep option (for dual sweep machines only), set almost flat makes short work of light application surface cleaning.
